Latest Firmware
Home / Huawei / Huawei Clone J7+ Flash File MT6580

Huawei Clone J7+ Flash File MT6580

Dear Respected visitor,It is a Huawei Clone J7+ Flash File Firmware (Flash Rom) Did you accidentally brick & bootloop your Huawei Clone J7+ device and you want to install the stock ROM again? for fix your device.then we will help you to install stock ROM on Huawei Clone J7+ Smartphone Since Huawei Clone J7+ is a MediaTek MT6580 Chip based device, You need to use SP Flash tool to flash Firmware on this device. If you have never done this before then don’t worry. We will guide you through all the necessary steps. If you’re facing any kind of software issue in your device, then installing stock ROM on Huawei Clone J7+ will solve all the problems. Whether it be hagging issue, hang on logo brick lcd problem etc software issue will be fixed on this Rom..

Download Huawei Clone J7+ Flash File (Stock Rom)

Flashing the Stock Firmware on Huawei Clone J7+ is quite easy and safe if you follow the guidelines and requirements we’ve mentioned below. You just need to download the firmware Rom and required tools/drivers on your PC and No need here any box dongle premium tools. it’s completely free solution without any box, so then follow the our guide to install the Firmware on Huawei Clone J7+ via SP Flash Tool (Smartphone flash tool). This guide is also helpful to recover your kind any any software issue

Huawei Clone J7+ The Following issues Will be Solved By this Firmware.

  • Fix your Huawei Clone J7+ bootloop & restart problem
  • Auto fastboot mode and recovery
  • Unroot or fix bugs your phone
  • Remove Pin/Pattern/privacy/password & frp lock
  • Upgrade and downgrade your phone
  • Huawei Clone J7+ Fix stuck on logo
  • Removes any virus, spyware or Adware unwanted apps
  • Fix lcd/display black & white after flash
  • Sp tools error while try to flash with other firmwares
  • Huawei Clone J7+ Unbrick Dead After Flash

Huawei Clone J7+ Flash File

Firmware Details:

Device Brand: Huawei
Model: J7+ & PRo
OS Version:  Android 7.0 (nougat)
Processor: MT6580 Mediatek Chipset
Driver: MTK USB Driver
Tool Support:  Smart Phone (Sp Flash Tool)
File Size: 516MB
File Type:  CM2 Readed
Archive Format:  7zip
Uploaded Link:  Google Drive

Download Firmware

Look Here For 1st Update 


Download Here

Before flashing this rom make sure to follow the pre-requisite and install the necessary have you drivers and tools on your PC And laptop to ready to flashing your Huawei Clone J7+


  • This Firmware will only work on Huawei Clone J7+. Don’t try it on others model.
  • A PC And Laptop
  • A Good USB Data Cable
  • should have your device charge the battery up to 60%
  • Huawei Clone J7+ Rom And Flashtool/USB Drivers

After downloading the Huawei Clone J7+ Flash file Tools Driver From above link .you will need to use Smartphone Sp flash Tool to flash the Stock firmware. Here is a detailed guide mentioned below which you can follow completely Step by Step

Instructions to Flashing Stock ROM on Huawei Clone J7+

Step 1. Download Firmware ROM Included Winrar/7ip Flash Tool & Usb Driver
Step 2. Extract The ROM Or Driver And Tool On Your PC
Step 3. After Extracting You Will See Flash Tool, Driver And Instruction Manual
Step 4. Install the USB Drivers Skip If Drivers Are Already Installed
Step 5. Open The Sp Flash Tool And load The Scatter File From The Firmware Folder
Step 6. Click Download Button In The SP Flash Tool To Start Flashing
Step 7. Connect Your Smartphone To The Computer Using By Good USB Cable
Step 8. Green Rink Ok Massage Will Appear Of Successful Flashing Complete And You Done

                                  How To Use Sp Flash Tool Guide With Photos Step By Step                               

You can follow our video tutriol Below

                                    How To Use Sp Flash Tool Video Tutriol Guide                                               

Read Must Flashing Before :

flashing The Huawei Clone J7+ ROM firmware to your Smart phoneerases everything in your phone data including Photos,videos,music, etc contents internal storage. We always advise to you backup your contents to an external memory if you need Installing rom before


Flashing This Firmware on your Phone may void the warranty. Firmware2flashfile will not be responsible for any kind of wrong happen during installing rom like OS And Build version Not match or properly not followed our guide. internal/external damages to the device that may happen while/after following this guide. Please proceed if you know what you’re doing!

So dear visitor,We hope that you’ve successfully flash the Stock Firmware on Huawei Clone J7+ Mediatek-chipset Android device easily. If you have any issues or queries, feel free to just ask in the comments below, we will try best for our visitors always can be find useful post

Check Also

Huawei Clone Nova 4 Flash File | MT6580 & MT6572 (All Update)

Table of Contents Download Huawei Clone Nova 4 Flash File (Stock Rom)MT6572 VersionMT6580 VersionHuawei Clone …

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: