Imam i10 EA Flash File MT6572 Last Update Firmware

Dear Respected visitor,It is a Imam i10 EA Flash File Firmware (Flash Rom) Did you accidentally brick & bootloop your Imam i10 EA device and you want to install the stock ROM again? for fix your device.then we will help you to install stock ROM on Imam i10 EA Smartphone Since Imam i10 EA is a MediaTek MT6572 Chip based device, You need to use SP Flash tool to flash Firmware on this device. If you have never done this before then don’t worry. We will guide you through all the necessary steps. If you’re facing any kind of software issue in your device, then installing stock ROM on Imam i10 EA will solve all the problems. Whether it be hanging issue, hang on logo brick lcd problem etc software issue will be fixed on this Rom..

Download Imam i10 EA Flash File (Stock Rom)

Flashing the Stock Firmware on Imam i10 EA is quite easy and safe if you follow the guidelines and requirements we’ve mentioned below. You just need to download the firmware Rom and required tools/drivers on your PC and No need here any box dongle premium tools. it’s completely free solution without any box, so then follow the our guide to install the Firmware on Imam i10 EA via SP Flash Tool (Smartphone flash tool). This guide is also helpful to recover your kind any any software issue

Imam i10 EA The Following issues Will be Solved By this Firmware.

• Fix your Imam i10 EA bootloop & restart problem
• Auto fastboot mode and recovery
• Unroot or fix bugs your phone
• Remove Pin/Pattern/privacy/password & frp lock
• Upgrade and downgrade your phone
• Imam i10 EA Fix stuck on logo
• Removes any virus, spyware or Adware unwanted apps
• Fix lcd/display black & white after flash
• Sp tools error while try to flash with other firmware
• Imam i10 EA Unbrick Dead After Flash

Firmware Details:

Download Firmware

MT6572__IMAM__i10__zl5e_ht_z115ec_imam_emmc32_4_ddr1_b18_fl__4.4.2__ALPS.KK1.MP7.Band1.2.5.V1.3

Download Here

Click Here For Imam i10 All Version

Before flashing this rom make sure to follow the pre-requisite and install the necessary have you drivers and tools on your PC And laptop to ready to flashing your Imam i10 EA

Pre-Requirements:

• This Firmware will only work on Imam i10 EA. Don’t try it on others model.
• A PC And Laptop
• A Good USB Data Cable
• should have your device charge the battery up to 60%
• Imam i10 EA Rom And Flashtool/USB Drivers

After downloading the Imam i10 EA Flash file Tools Driver From above link .you will need to use Smartphone Sp flash Tool to flash the Stock firmware. Here is a detailed guide mentioned below which you can follow completely Step by Step

Instructions to Flashing Stock ROM on Imam i10 EA

Step 1. Download Firmware ROM Included Winrar/7ip Flash Tool & Usb Driver
Step 2. Extract The ROM Or Driver And Tool On Your PC
Step 3. After Extracting You Will See Flash Tool, Driver And Instruction Manual
Step 4. Install the USB Drivers Skip If Drivers Are Already Installed
Step 5. Open The Sp Flash Tool And load The Scatter File From The Firmware Folder
Step 6. Click Download Button In The SP Flash Tool To Start Flashing
Step 7. Connect Your Smartphone To The Computer Using By Good USB Cable
Step 8. Green Rink Ok Massage Will Appear Of Successful Flashing Complete And You Done

                                  How To Use Sp Flash Tool Guide With Photos Step By Step                               

You can follow our video tutorial Below

Read Must Flashing Before :

Warnning

So dear visitor,We hope that you’ve successfully flash the Stock Firmware on Imam i10 EA Mediatek-chipset Android device easily. If you have any issues or queries, feel free to just ask in the comments below, we will try best for our visitors always can be find useful post