Dear Respected visitor,It is a Invens Jazz 1 Flash File Firmware (Flash Rom) Most smartphone gets hard brick because users careless and installing third party infected apps or during wrong rooting process.
so Did you accidentally brick & bootloop your Invens Jazz 1 device and you want to install the stock ROM again? for fix your device.then we will show you on this post how to install stock ROM on Invens Jazz 1 Smartphone Since Invens Jazz 1 is a (SPD) Spreadtrum processor Chip based device, You need to use Spd Factory & Spd Upgrade Flash tool to flash Firmware on this device.
Download Invens Jazz 1 Flash File (Stock Rom)
Flashing the Stock Firmware on Invens Jazz 1 is quite easy and safe if you follow the guidelines and requirements we’ve mentioned below. You just need to download the firmware Rom and required tools/drivers on your PC and No need here any box dongle premium tools. it’s completely free solution without any box, so then follow the our guide to install the Firmware on Invens Jazz 1 via Spd Flash Tool (Spd upgrade tool).This guide is also helpful to recover your kind any any software issue
We will guide you with all require files and steps. If you’re facing any kind of any software issue in your device, then installing stock ROM on Invens Jazz 1. Whether it be hanging issue, hang on logo brick lcd problem etc software issue will be fixed on this Rom..
Invens Jazz 1 The Following issues Fixed on This rom !
- Fix your Invens Jazz 1 bootloop & restart problem
- Auto fastboot mode and recovery
- Unroot or fix bugs your phone
- Remove Pin/Pattern/privacy/password & frp lock
- Upgrade and downgrade your phone
- Invens Jazz 1 Fix Auto On off
- Removes any virus, spyware or Adware unwanted apps
- Fix lcd/display black & white after flash
- Sp tools error while try to flash with other firmware
- Invens Jazz 1 Unbrick Dead After Flash
|OS Version:||Android 9.0 (Pie)|
|Driver:||Spreadtrum (SPD Android USB Driver)|
|Tool Support:||Spd Factory Tool (Sp Flash Tool)|
|Uploaded Link:||Google Drive|
Before flashing this rom make sure to follow the pre-requisite and install the necessary have you drivers and tools on your PC And laptop to ready to flashing your Invens Jazz 1
- This Firmware will only work on Invens Jazz 1. Don’t try it on others Device.
- A PC And Laptop (Windows 7 And Windows 8.1 And Windows 10 better For Work)
- A Good USB Data Cable (Should Original One Can Well For Flashing)
- should have your device charge the battery up to 50%
- Invens Jazz 1 Rom And Flash tool/ Spreadtrum USB Drivers
After downloading the Invens Jazz 1 Flash file Tools Driver From above All Require Files then now come to the installing proceed. If you are new on this stuff then don’t worry We will guide you through each step by step. you need to Just read below all the steps carefully
Instructions to Flashing Stock ROM on Invens Jazz 1
- Install Spreadtrum usb drivers on pc [required] if install before the skip it
- ReserchDownload And Factory & Spd Upgrade Tool Run Exe From your pc
- Now click on “Load Packets” gear icon and browse the.pac file from firmware folder.
- Hit “Play Button” to start the flashing process.
- And Now Power Off Your Smartphone Plug In USB Cable Pressing By Boot Key
- Note: Boot key may be different for different devices try to hold vol+ and vol- only by one
- Once it will detect your device, flashing process will start and it will take 4-5 minutes to flash firmware.
End of the process, it will show green “Passed” message on the flash tool window.
- Unplug the device And You done
Follow The Spd Flashing Guideline With Picture
Aslo You can follow our video tutorial BelowHow To Use Sp Flash Tool Video tutorial Guide
Read Must Flashing Before :
So dear visitor,We hope that you’ve successfully flash the Stock Firmware on Invens Jazz 1 Mediatek-chipset Android device easily. If you have any issues or queries, feel free to just ask in the comments below, we will try best for our visitors always can be find useful post