Latest Firmware
Home / Oppo / Oppo Clone P20 Pro Flash File | MT6580 Android 5.1 (Update) Stock Rom

Oppo Clone P20 Pro Flash File | MT6580 Android 5.1 (Update) Stock Rom

Dear Respected visitor,It is a Oppo Clone P20 Pro Flash File Firmware (Flash Rom) for fixed your device like hang on logo brick lcd problem etc software issue will be fixed on this Rom Download the below flash file and after unzip you will found firmware Usb driver or Flash tool manual

Download Oppo Clone P20 Pro Flash File (Stock Rom)

Flashing the Stock Firmware on Oppo Clone P20 Pro is quite easy and safe if you follow the guidelines and requirements we’ve mentioned below. You just need to download the firmware Rom and required tools/drivers on your PC and No need here any box dongle premium tools. it’s completely free solution without any box, so then follow the our guide to install the Firmware on Oppo Clone P20 Pro via SP Flash Tool (Smartphone flash tool). This guide is also helpful to recover your kind any any software issue

Oppo Clone P20 Pro The Following issues Will be Solved By this Firmware.

  • Fix your Oppo Clone P20 Pro bootloop & restart problem
  • Auto fastboot mode and recovery
  • Unroot or fix bugs your phone
  • Remove Pin/Pattern/privacy/password & frp lock
  • Upgrade and downgrade your phone
  • Oppo Clone P20 Pro Fix stuck on logo
  • Removes any virus, spyware or Adware unwanted apps
  • Fix lcd/display black & white after flash
  • Sp tools error while try to flash with other firmwares
  • Oppo Clone P20 Pro Unbrick Dead After Flash

Oppo Clone P20 Pro Flash File

About Phone Information

Brand: Oppo
CPU  : MT6580
Android : 5.1
File Type : CM2 Readed
File Size : 575MB

No Need Box For Flashing Flash With Sp Flash Tool

Oppo Clone P20 Pro Update Official Firmware Stock Rom Download

MT6580__Welcome__T702__P20_Pro__5.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

Hang Logo Fixed

Download Here

Before flashing this rom make sure to follow the pre-requisite and install the necessary have you drivers and tools on your PC And laptop to ready to flashing your Oppo Clone P20 Pro

Pre-Requirements:

  • This Firmware will only work on Oppo Clone P20 Pro. Don’t try it on others model.
  • A PC And Laptop
  • A Good USB Data Cable
  • should have your device charge the battery up to 60%
  • Oppo Clone P20 Pro Rom And Flashtool/USB Drivers

After downloading the Oppo Clone P20 Pro Flash file Tools Driver From above link .you will need to use Smartphone Sp flash Tool to flash the Stock firmware. Here is a detailed guide mentioned below which you can follow completely Step by Step

Instructions to Flashing Stock ROM on Oppo Clone P20 Pro

Step 1. Download Firmware ROM Included Winrar/7ip Flash Tool & Usb Driver
Step 2. Extract The ROM Or Driver And Tool On Your PC
Step 3. After Extracting You Will See Flash Tool, Driver And Instruction Manual
Step 4. Install the USB Drivers Skip If Drivers Are Already Installed
Step 5. Open The Sp Flash Tool And load The Scatter File From The Firmware Folder
Step 6. Click Download Button In The SP Flash Tool To Start Flashing
Step 7. Connect Your Smartphone To The Computer Using By Good USB Cable
Step 8. Green Rink Ok Massage Will Appear Of Successful Flashing Complete And You Done

                                  How To Use Sp Flash Tool Guide With Photos Step By Step                               

You can follow our video tutriol Below

                                    How To Use Sp Flash Tool Video Tutriol Guide                                               

Read Must Flashing Before :

flashing The Oppo Clone P20 Pro ROM firmware to your Smart phoneerases everything in your phone data including Photos,videos,music, etc contents internal storage. We always advise to you backup your contents to an external memory if you need Installing rom before

Warnning

Flashing This Firmware on your Phone may void the warranty. Firmware2flashfile will not be responsible for any kind of wrong happen during installing rom like OS And Build version Not match or properly not followed our guide. internal/external damages to the device that may happen while/after following this guide. Please proceed if you know what you’re doing!

So dear visitor,We hope that you’ve successfully flash the Stock Firmware on Oppo Clone P20 Pro Mediatek-chipset Android device easily. If you have any issues or queries, feel free to just ask in the comments below, we will try best for our visitors always can be find useful post

About atikcox

Check Also

Oppo Clone V30 Pro Flash File | MT6580 Android 9.0 Pie (Update Rom)

Dear Respected visitor,It is a Oppo Clone V30 Pro Flash File Firmware (Flash Rom) for …

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: